Centrix R53 Release Notes
- Former user (Deleted)
- Jamie (Deactivated)
Analogue graph axis improvements
Previously, when channels were configured with auto axis settings on the graph widget, Centrix simply determined the scale of the axis based on the minimum and maximum value on that channel. If you added multiple channels that had a very similar scale, they would still be created with their own y-axis, this could result in many axes that are almost identical.
Centrix now uses the Units of a channel to combine channels onto a single axis (if a channel has the scaling configured as Auto). This means that similar channels should now be automatically added to the same y-axis with a sensible range configured as the min/max of all the channels on the axis.
For this functionality to work as expected it is recommended that you configure the units on your channels. This can be done through the channel mapping screen (in Loggers) or via the Channels page. Unfortunately, the protocol used to transfer channel information between the logger and Centrix does not include the units, therefore you have to configure them manually in Centrix, even if you have already configured them from within the logger.
State transition counts report
The state transition counts report has now been updated to a modern HTML version.
Further documentation to follow.
Points swing counts report
This release introduces a new report for displaying the number of swings for all points assets on a site.
Further documentation to follow.