SA380TX-L Firmware Upgrade Support
This page is designed to steer you towards the correct instructions for upgrading your SA380TX-L data logger such that is running the optimal firmware for its operating environment.
Upgrade Guide
Step 1 - Determine current and target firmware, and upgrade method
This applies to all modstates of the TX-L
Platform | <2699 | ≥2699 | 2792 |
---|---|---|---|
Centrix Upgrade to CENTRIX APPROVED firmware | Use ZIP file: On site over USB using dPanel. | Use UPG file Upgrade via Centrix. On site over USB using dPanel. | CENTRIX APPROVED |
NR II / RADAR (Private APN with IP access) Upgrade to NR II APPROVED firmware | Use ZIP file: On site over USB using dPanel. Remotely using dPanel / web config pages Remotely using dUpgrade | Use UPG file: On site over USB using dPanel. Remotely using dPanel / web config pages Remotely using dUpgrade | NR II APPROVED |
Step 2 - Find the appropriate files
If you’re upgrading remotely from Centrix, you can skip this step!
Based on the target firmware and upgrade method, download the appropriate file from the firmware downloads page.
Step 3 - Follow the appropriate guide
Using dPanel
SeeSA380TX-L Configuration & diagnostics software (bottom of page)
Using web config pages
Open the loggers web config pages in your web browser
Navigate to the “Commands” tab and press “Select File…”
Choose the appropriate file for the firmware vintage (ZIP if upgrading from <2699, otherwise UPG)
Press the “Upgrade” button.
The logger may report the upgrade was unsuccessful. If this happens, reload the web page and check the firmware version (“Real-time” tab, “Versions” section) before retrying, as the upgrade may still have succeeded.
Using Centrix
Navigate to the logger page and select the “Firmware” tab.
Click on the latest “Centrix Approved” firmware, and press “Ok”