SA-SSI Status Information

The current state of the SA-SSI data logging unit, including information about the current connection status, events and battery can be found on the status page.

To navigate to this screen press the "Status" button on the home page:

This will display the following page:

The indicators on the right of the page, display the current state of each application function. Further information on the meaning of each of these can be found in the following table.

Application Function	Black	Red	Amber	Green	Additional Information
Internet	N/A	Not connected	N/A	Connected	Internet : [connection information]
SSI	USB adapter not connected	No connection/communication with Park Module	Incorrect ident	OK	Display name: SSI/[site name]/[channel in use]
Power	N/A	Running on battery/battery voltage low	Running on batter/battery voltage ok	Mains connected	Display name: Power (Mains/Charging/Battery)
OS	N/A	Not started	Misconfigured	OK
Centrix	N/A	Not connected	No traffic for more than 1 minute	OK/Connected
Events	Uninitialised	Internal fault	Misconfigured	OK
NTP	N/A	Not connected	Clock not set	OK
Watchdog	N/A	An application has failed	N/A	All OK

Internet connection and IP address

Further information regarding the IP address of the SA-SSI can be viewed by pressing on the "Internet" button, as shown below:

Navigating to the IP Addresses page will display all the IP addresses associated with the data logger, as shown below:

SA380 Series Documentation

SA-SSI Status Information

Analytics

Internet connection and IP address

Related content