SA380-IT Powering Down

The SA380-IT does not have internal battery backup. Removing power will cause the logger to shut down.

To safely power down the logger, the following procedures should take place:

Mains:

Turn the plug off by the switch and remove the plug from the socket.

Pull the logger power connector out of the logger.

Busbar:

Disconnect the fuse that connects the logger to the busbar.

Pull the logger power connector out of the logger.

Rebooting through Mpec Connect

The SA380-IT can also be rebooted via bluetooth through the Mpec Connect app.

Connect to the app to the logger as described in section ‘5.2) Connecting to the SA380-IT' of SA380-IT User Guide

On the app navigate into ‘Utilities’, then select ‘Reboot’.

Open