Introduction
The SA380TX-L datalogger can monitor up to eight EBITrack units at a time.
Hardware setup
Configuration
Web interface
Enter the logger's IP address into your browser:
Successful connection will show the loading screen first:
Once loaded it shows the current configuration of the logger:
To make the SA380TX-L to request data from the EBITrack unit, you need to know the EBITrack unit's KEY serial number.
Type the serial numbers into EBITrack Unit Settings frame:
Specify whether the collected EBITrack data needs to be sent to the server. Tick "Send to Server" if so.
Once finished, press Set button to send the new configuration to the logger.
Once the configuration is set, you will want to make sure that the EBITrack units are talking to the logger. To check that quickly, go to the Real-time tab and EBITrack:
then 
also press 
dPanel