Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

SA380TX Generic logger firmware 1.5G. can report events as RailEvents.

Sending singular digital events is not practical with the elaborate RailEvent configuration: start trigger, end trigger, logged channels on changes and event timeout etc.

It is desirable to send all or a subset of digitals to server as singular events.

Step-by-step guide

  1. Expose virtual digital channels as physical digitals:
    Consider that VirtualDigital=0 channel is physical=64.
    For example adding virtual channel 3 to RealInputs:
    <>
  1. Send all digitals to server:
    Enter Configuration menu and select Advanced configuration. Navigate to MIMOSA config. Press Push digitals to server.
    This will make all exposed physical digital channels to be sent to server.
  2. If merely a subset if digitals need to be sent to server then change the XML configuration. DipCfg section. Set individual push parameters to 1=send or 0=not to send.

 



  • No labels