This page is designed to steer you towards the correct instructions for upgrading your SA380TX data logger such that is running the optimal firmware for its operating environment.
Already know how you want to proceed?
Use the links below to jump straight to the relevant article, or the Mpec firmware downloads Page
SA380TX - Firmware Upgrade from .ZIP files using a USB Drive
SA380TX - Firmware Upgrade from .UPG files using a USB Drive
SA380TX - Firmware Upgrade using dUpgrade
SA380TX - Firmware Upgrade using Centrix
Upgrade Guide
Step 1 - Determine logger modstate
See Determine the Mod State of an SA380TX.
Step 2 - Determine current and target firmware, and upgrade method
Based on the modstate determined in step 1:
Modstate 3+
Platform | firmware < 1144 (including 1.5T446-3G-B) | from firmware ≥ 1144 | 1319 |
|---|---|---|---|
Centrix Upgrade to CENTRIX APPROVED firmware | Use 1319 USB ZIP file:
| Use 1319 UPG file:
| CENTRIX APPROVED |
NR II / RADAR (Private APN with IP access) Upgrade to NR II APPROVED firmware | Use 1319 ZIP files:
| Use 1319 UPG file:
| NR II APPROVED |
Not connected to any system | Use 1319 USB ZIP file:
| Use 1319 UPG file:
|
Modstate 1/2
Platform | firmware < 1.5T446-3G-B | 1.5T446-3G-B | 311 |
|---|---|---|---|
Centrix Upgrade to CENTRIX APPROVED firmware | Use 311 USB ZIP file:
| CENTRIX APPROVED | |
NR II / RADAR (Private APN with IP access) Upgrade to NR II APPROVED firmware | Use 1.5T446-3G-B ZIP files:
| NR II APPROVED | NOT SUPPORTED |
Not connected to any system | Use 311 USB ZIP file:
| ||
Step 3 - Find the appropriate files
If you’re upgrading remotely from Centrix, you can skip this step!
Based on the modstate, target firmware and upgrade method, download the appropriate file from the firmware downloads page.
Step 4 - Follow the appropriate instructions:
Upgrading with USB on site
SA380TX - Firmware Upgrade from .ZIP files using a USB Drive
SA380TX - Firmware Upgrade from .UPG files using a USB Drive
Upgrading remotely with dUpgrade
SA380TX - Firmware Upgrade using dUpgrade