Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

Fault 3 and Fault 4 cause a larger voltage to be presented to the SA380-IT than Fault 1 and Fault 2. All four faults can also present in any combination, however the voltages presented in the case of Fault 1 and Fault 2 represent a "worst case"

Equation 1 should therefore be used for the selection of alert levels and used to inform intervention decisions. The value yielded by equation 1 should there be read as "Resistance greater than or equal to X"

Equation 1 also assumes a nominal circuit voltage. A voltage of 11.4 volts has been used to produce the table below. If it is credible that the cell voltage could fall further, yet the circuit remains operable, then a different nominal voltage should be used to populate the table.


Configuration

If the wiring diagram above has been followed, the SA380-IT inputs should be configured as per the table below:

Input No.NameVoltageType
1B1212DC
2ISO 124DC
3ISO 224DC
4XB1212DC

Fault Resistance Table

Use the look up table below to convert the voltage present on wither the "ISO 1" or "ISO 2" channels into a worst-case level of inter-circuit isolation.

The table is populated using Equation 1, using a nominal circuit voltage of 11.4 V

The resistance value stated is "worst-case" the true level of isolation resistance may be greater and will be dependant upon how the fault is manifest.

Measured Voltage

(ISO 1 or ISO 2)

Insulation Resistance

(>= k Ohm)

0INF
0.131866
0.215792
0.310434
0.47755
0.56148
0.65076
0.74311
0.83737
0.93290
12933
1.12641
1.22397
1.32191
1.42014
1.51861
1.61727
1.71609
1.81504
1.91410
21325
2.11249
2.21179
2.31116
2.41058
2.51004
2.6954
2.7909
2.8866
2.9827
3790
3.1755
3.2723
3.3692
3.4664
3.5637
3.6611
3.7587
3.8564
3.9542
4522
4.1502
4.2483
4.3466
4.4449
4.5432
4.6417
4.7402
4.8388
4.9374
5361
5.1348
5.2336
5.3325
5.4313
5.5303
5.6292
5.7282
5.8272
5.9263
6254
6.1245
6.2237
6.3228
6.4220
6.5213
6.6205
6.7198
6.8191
6.9184
7177
7.1171
7.2165
7.3158
7.4152
7.5147
7.6141
7.7136
7.8130
7.9125
8120
8.1115
8.2110
8.3105
8.4101
8.596
8.692
8.788
8.883
8.979
975
9.171
9.267
9.364
9.460
9.556
9.653
9.749
9.846
9.943
1039
10.136
10.233
10.330
10.427
10.524
10.621
10.718
10.816
10.913
1110
11.18
11.25
11.32
11.40
11.50
11.60
11.70
11.80
11.90
120