...
The SA380TX is factory-set with a fixed IP address of 10.0.1.1:8080. This address can be changed – see page 40 for details.
| Note |
|---|
Note that |
...
: The web server is on port 8080. |
...
Internet / intranet
If the logger is connected to a company network, its IP address will have been set when the unit was commissioned.
...
To connect to a logger over the phone network, a new Dial-up Networking connection must be created.
To accomplish this, carry out the following steps.
...
Select Network and Dial-up Connections
Double-click on ‘Make New Connection’
...