Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

First connect to the SA380TX unit over a dial-up or an Ethernet connection as per the manufacturer’s instructions.

Open the web browser on your computer.

Enter http://[the IP address of the data logging unit you have accessed]/config into the address bar.

The IP address that you enter might be different to ’10.0.1.1’. This can be checked by pressing the ‘About’ button in the ‘Options’ menu.

 

When prompted for a user name and password enter the following:

User Name: sa380user

Password: sa380user

 

A page similar to the one below should then be displayed. This is the Web Config Tool for the MPEC SA380TX.

 

 

 

  • No labels