The Alarms module allows you to configure conditions for which the system will send an e-mail alert.
There are a number of pre-configured alert templates available in the system;
| Type | Description | Status |
|---|---|---|
| Train Over Speed | Set a minimum transition time between 2 track circuits to detect a speeding train | OK |
| Possible SPAD | Detect when a signal is passed at danger | OK |
| SA380 Slave Offline | Detect when an SA380 slave unit has gone inactive | OK |
| Digital State Change | Detect a state change on any digital input channel | OK |
| Track Flick | Detect a flick on a track circuit by specifying a minimum occupation time | OK |
| Points Flick | Detect loss of detection on a set of points | OK |
| Signal Reversion | Detect a signal reverting to danger when approaching track circuit is occupied | EXPERIMENTAL |
| Analogue Level | Detect when an analogue channel exceeds a given threshold value | OK |
| Capture Trace Levels | Detect when a capture trace exceeds any given threshold values | OK |
| Logger Contact (Comms) Alert | Detect when a dialled logger hasn't been successfully contacted for a given period of time | OK |