...
- Setup analogue input channel: set channel name and input sensor
- Setup data acquisition type
GUI
Setting up analogue input channel
First of all you have to set an appropriate name and input sensor for the analogue channel.
...
Select the appropriate sensor and press the "OK" button to select it for the analogue channel.
If you are happy with the analogue channel settings, press Save: 
The logger will notify you about the configuration changes:
...
The actual input value can be read on the graph. (Which is -5A now, since we don't have actual sensor connected to the analogue channel.)
Setting up analogue data acquisition
then enter password and enter: 
...
The next selector dialog shows which analogue channels are collecting acquire-on-change measurements:
select
select 701 WI channel: 
Brings you to the acquire-on-change configuration dialog:
Most
Most importants settings are the ON/OFF and the "Push to seriverserver" toggle buttons.
For the most basic measurement it is usually enough to enable the acquisition, so just toggle ON/OFF and push to servera typical configuration, set the acquire-on-change threshold to 1% (lower than the default 5%), then toggle push to server and ON/OFF, then save the changes:
Now the data collection method is set for the particular analogue channel. Let's see the collected data:
...
Navigate to acquire-on-change historical data for analogue channel 701 WI:
| Info |
|---|
| Notice that setting the acquire-on-change configuration will make the logger to acquire a first sample as a base value without any actual input change. |
Web interface
Visiting the web interface we will focus on the Analogue Inputs part of the configuration.
Let's set AN-A02 to a track circuit and enable acquire-on-change on it:
Set name:
Set sensor:
Set acquire-on-change:
Send to logger:
WebCFG tool sends and retrieves the configuration again:
Check the output of the data acquisition:
Gets to: 
Select today's date:
Open acqchg folder:
Open the new file for AB TR we just set up:
The opened file must contain at least one sample as base acquisition.
Related articles
| Filter by label (Content by label) | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Page Properties | ||
|---|---|---|
| ||
|
...