This page is designed to steer you towards the correct instructions for upgrading your SA380TX data logger such that is running the optimal firmware for its operating environmnetenvironment.
Already know how you want to proceed?
Use the links below to jump striaght straight to the relevent relevant article, or the Mpec firmware downloads Page
...
SA380TX - Firmware Upgrade from .ZIP files using a USB Drive
Unsure how to proceed?
Answer the questions below and you shall be steered towards the correct procedure:
Questions:
Q1: Are you trying to upgrade a pre-Mod State 3 device, or a Mod State 3 onward device?
Help: How do I find my mod state?
...
Q2: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?
- My logger connects to Centrix
- My logger connects to the Network Rail Intelligent Infrastructure system
- My logger is not connected to any back-office asset management system
...
Q2: What Firmware Version is your SA380TX currently running?
Help : How do I know which version of firmware I am running?
- My logger is running a firmware version prior to "1144"
- My logger is running firmware version "1144" or later
...
Q3: How do you wish to apply the firmware upgrade?
...
Q3: How do you wish to apply the firmware upgrade?
...
Q3: How do you wish to apply the firmware upgrade?
...
Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?
- My logger connects to Centrix
- My logger connects to the Network Rail Intelligent Infrastructure system
- My logger is not connected to any back-office asset management system
...
Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?
- My logger connects to Centrix
- My logger connects to the Network Rail Intelligent Infrastructure system
- My logger is not connected to any back-office asset management system
...
Q4: How do you wish to apply the firmware upgrade?
...
Q4: How do you wish to apply the firmware upgrade?
...
Q4: How do you wish to apply the firmware upgrade?
...
Q4: How do you wish to apply the firmware upgrade?
...
Q4: How do you wish to apply the firmware upgrade?
...
Q4: How do you wish to apply the firmware upgrade?
Answers
...
A1: Upgrading a Mod State 1 or Mod State 2 SA380TX with a USB drive, using the "Centrix Approved" .ZIP firmware package for USB drives
1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:
- For SA380TX MS1/2
- Firmware that is "Centrix Approved".
- Pre-formated to work with USB drives
| Info |
|---|
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package. |
2) Follow the instructions for SA380TX - Firmware Upgrade from .ZIP files using a USB Drive using the firmware package just downloaded.
...
1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:
- For SA380TX MS1/2
- Firmware that is "Centrix Approved".
- Pre-formated to work with dUpgrade
| Info |
|---|
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package. |
2) Follow the instructions for SA380TX - Firmware Upgrade using dUpgrade using the firmware package just downloaded.
Anchor
SA380TX - Firmware Upgrade using dUpgrade
SA380TX - Firmware Upgrade using Centrix
Upgrade Guide
Step 1 - Determine logger modstate
See Determine the Mod State of an SA380TX.
Step 2 - Determine current and target firmware, and upgrade method
Based on the modstate determined in step 1:
Modstate 3+
Platform | firmware < 1144 (including 1.5T446-3G-B) | from firmware ≥ 1144 | 1319 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Centrix Upgrade to
| Use 1319 USB ZIP file:
| Use 1319 UPG file:
|
| ||||||||||||
NR II / RADAR (Private APN with IP access) Upgrade to
| Use 1319 ZIP files:
| Use 1319 UPG file:
|
| ||||||||||||
Not connected to any system | Use 1319 USB ZIP file:
| Use 1319 UPG file:
|
Modstate 1/2
Platform | firmware < 1.5T446-3G-B | 1.5T446-3G-B | 311 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Centrix Upgrade to
| Use 311 USB ZIP file:
|
| |||||||||||||||||||
NR II / RADAR (Private APN with IP access) Upgrade to
| Use 1.5T446-3G-B ZIP files:
|
|
| ||||||||||||||||||
Not connected to any system | Use 311 USB ZIP file:
| ||||||||||||||||||||
Step 3 - Find the appropriate files
| Info |
|---|
If you’re upgrading remotely from Centrix, you can skip this step! |
Based on the modstate, target firmware and upgrade method, download the appropriate file from the firmware downloads page.
Step 4 - Follow the appropriate instructions:
Upgrading with USB on site
SA380TX - Firmware Upgrade from .ZIP files using a USB Drive
SA380TX - Firmware Upgrade from .UPG files using a USB Drive
Upgrading remotely with dUpgrade
SA380TX - Firmware Upgrade using dUpgrade