This page is designed to steer you towards the correct instructions for upgrading your SA380TX data logger such that is running the optimal firmware for its operating environmnetenvironment.

Already know how you want to proceed?

Use the links below to jump striaght straight to the relevent relevant article, or the Mpec firmware downloads Page

Unsure how to proceed?

Answer the questions below and you shall be steered towards the correct procedure:

Questions:

Q1: Are you trying to upgrade a pre-Mod State 3 device, or a Mod State 3 onward device?

How do I find my mod state?

• I have a Mod State 1 or Mod State 2 device 
• I have a Mod State 3 or later device

...

• My logger connects to Centrix
• My logger connects to the  Network Rail Intelligent Infrastructure system
• My logger is not connected to any back-office asset management system

...

How do I know which version of firmware I am running?

• My logger is running a firmware version prior to "1144"
• My logger is running firmware version "1144" or later

...

• On-site using a USB drive
• On-site using a wired Ethernet connection using dUpgrade software running on a laptop
• Remotely using dUpgrade running over an IP network

...

• On-site using a USB drive
• On-site using a wired Ethernet connection using dUpgrade software running on a laptop
• Remotely using dUpgrade running over an IP network

...

• On-site using a USB drive
• On-site using a wired Ethernet connection using dUpgrade software running on a laptop

...

• My logger connects to Centrix
• My logger connects to the  Network Rail Intelligent Infrastructure system
• My logger is not connected to any back-office asset management system

...

• My logger connects to Centrix
• My logger connects to the  Network Rail Intelligent Infrastructure system
• My logger is not connected to any back-office asset management system

...

• On-site using a USB drive
• On-site using a wired Ethernet connection using dUpgrade software running on a laptop
• Remotely using dUpgrade running over an IP network

...

• On-site using a USB drive
• On-site using a wired Ethernet connection using dUpgrade software running on a laptop
• Remotely using dUpgrade running over an IP network

...

• On-site using a USB drive
• On-site using a wired Ethernet connection using dUpgrade software running on a laptop

...

• On-site using a USB drive
• On-site using a wired Ethernet connection using dUpgrade software running on a laptop
• Remotely using Centrix

...

• On-site using a USB drive
• On-site using a wired Ethernet connection using dUpgrade software running on a laptop
• Remotely using dUpgrade running over an IP network

...

• On-site using a USB drive
• On-site using a wired Ethernet connection using dUpgrade software running on a laptop

Answers

AnchorA1A1A1: Upgrading a Mod State 1 or 2 SA380TX with a USB drive, using the "Centrix Recomended" .ZIP firmware package for USB drives AnchorA2A2A2: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade locally, using the "Centrix Recomended" .ZIP firmware package for dUpgrade AnchorA3A3A3: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade remotely, using the "Centrix Recomended" .ZIP firmware package for dUpgrade AnchorA4A4A4: Upgrading a Mod State 1 or 2 SA380TX with a USB drive, using the "NR-II Approved" .ZIP firmware package for USB drives AnchorA5A5A5: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade locally, using the "NR-II Approved" .ZIP firmware package for dUpgrade AnchorA6A6A6: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade remotely, using the "NR-II Approved" .ZIP firmware package for dUpgrade AnchorA7A7A7: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using "Centrix Recomended" .UPG firmware package AnchorA8A8A8: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally,  first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using "Centrix Recomended" .UPG firmware package AnchorA9A9A9: Upgrading a Mod State 3 or later SA380TX by first using dUpgrade remotely to apply the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using Centrix to apply the "Centrix Recomended" .UPG firmware package. AnchorA10A10A10: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using  "NR-II Approved" .UPG firmware package AnchorA11A11A11: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using  "NR-II Approved" .UPG firmware package AnchorA12A12A12: Upgrading a Mod State 3 or later SA380TX with dUpgrade remotely, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using  "NR-II Approved" .UPG firmware package AnchorA13A13A13: Upgrading a Mod State 3 or later SA380TX with a USB drive,  using the "Centrix Recomended" .UPG firmware package AnchorA14A14A14: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, using the "Centrix Recomended" .UPG firmware package AnchorA15A15A15: Upgrading a Mod State 3 or later SA380TX  with Centrix, using the "Centrix Recomended" .UPG firmware package AnchorA16A16A16: Upgrading a Mod State 3 or later SA380TX with a USB drive, using the "NR-II Approved" .UPG firmware package AnchorA17A17A17: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, using the "NR-II Approved" .UPG firmware package AnchorA18A18A18: Upgrading a Mod State 3 or later SA380TX with dUpgrade remotely, using the "NR-II Approved" .UPG firmware packageMpec Firmware Downloads Page

SA380TX - Firmware Upgrade from .ZIP files using a USB Drive

SA380TX - Firmware Upgrade from .UPG files using a USB Drive

SA380TX - Firmware Upgrade using dUpgrade

SA380TX - Firmware Upgrade using Centrix

Upgrade Guide

Step 1 - Determine logger modstate

See Determine the Mod State of an SA380TX.

Step 2 - Determine current and target firmware, and upgrade method

Based on the modstate determined in step 1:

Modstate 3+

Modstate 1/2

Step 3 - Find the appropriate files

Based on the modstate, target firmware and upgrade method, download the appropriate file from the firmware downloads page.

Step 4 - Follow the appropriate instructions:

Upgrading with USB on site

SA380TX - Firmware Upgrade from .ZIP files using a USB Drive

SA380TX - Firmware Upgrade from .UPG files using a USB Drive

Upgrading remotely with dUpgrade

SA380TX - Firmware Upgrade using dUpgrade

Upgrading remotely with Centrix

SA380TX - Firmware Upgrade using Centrix