Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

4-20mA Sensor Tables

Part No.

Variant Description

Quantity

Quantity Description

Value @ 4mA

Value @ 20mA

Units

Suggested AoC

VTI21-VT1AC Vane Relay VariantTorqueInstantaneous Torque Exerted on the relay vane.0+25m.Nm0.2 m.Nm
VTI21-HVIHVI Receiver VariantAverage CurrentAverage HVI Pulsed Current seen by the VTI21 from input channel 1.0600mA15 mA
VTI21-TI21TI21 / EbiTrack 200 VariantAverage CurrentAverage of upper and lower sideband current from VTI21 input channel 1.01500mA5 mA
VTI21-FS25FS2500 Receiver VariantCenter CurrentAmplitude of the FS2500 center frequency current from VTI21 input channel 1.01500mA5 mA
VTI21-FS26FS2600 Receiver VariantCenter CurrentAmplitude of the FS2500 center frequency current from VTI21 input channel 1.01500mA5 mA
VTI21-ACSGeneral Purpose AC sensing up to 25A RMSCurrentRMS current from VTI21 input channel 1.025A0.2 A
VTI21-UM71UM71 VariantCurrentCurrent at selected center frequency from VTi21 input channel 1.05000µA100µA
VTI21-ASTERAster VariantCurrentCurrent at selected center frequency from VTi21 input channel 1.05000µA100µA
VTI21-REEDReed Relay VariantCurrentCurrent measured across the Reed relay frequency range on input channel 1.05000mA25mA
VTI21-RFDMReed Relay FDM variantn/anone



...

Slave Channel

VTI21 Input Channel

Quantity

Description

Typical Range

Units

Suggested AoC

1 - ANA1HVI CurrentRMS Current of the pulsed waveform0 to 1500mA15 5 mA
2 - ANA1HVI FrequencyThe frequency of pulses0 to 5Hz0.1 Hz
3 - ANA1Noise CurrentThe RMS current observed between pulses.0 to 1500mA15 5 mA
4 - ANA1Pulse WaveformIf this channel is requested as a capture, the VTi21 will return a high-resolution waveform of the last observed pulse0 to 1500mATriggered Capture
1 - DIG1Pulse ConflictSet TRUE if pulses are observed to be bleeding through from adjacent track sectionsDigitalNAOn Change
5 - ANA2HVI CurrentRMS Current of the pulsed waveform0 to 1500mA15 5 mA
6 - ANA2HVI FrequencyThe frequency of pulses0 to 5Hz0.1 Hz
7 - ANA2Noise CurrentThe RMS current observed between pulses.0 to 1500mA15 5 mA
8 - ANA2Pulse WaveformIf this channel is requested as a capture, the VTi21 will return a high-resolution waveform of the last observed pulse0 to 1500mATriggered Capture
2 - DIG2Pulse ConflictSet TRUE if pulses are observed to be bleeding through from adjacent track sectionsDigitalNAOn Change

...

Slave Channel

VTI21 Input Channel

Quantity

Description

Typical Range

Units

Suggested AoC

11CH 1 FrequencyChannel 1 Frequency Selected1700 to 2600Hz1
21CH 1 Side Band RatioRatio of lower to upper frequency (0%=all lower, 100%=all upper)0 to 100%%5
31CH 1 Raw FrequencySimple Frequency Measurement (zero crossings)1600 to 2700Hz100
41CH 1 Total CurrentTotal current in the UM71 band0 to 5mAµA100
51CH 1 current 1700HzCurrent measured at 1700Hz0 to 5mAµA100
61CH 1 current 2000HzCurrent measured at 2000Hz0 to 5mAµA100
71CH 1 current 2300HzCurrent measured at 2300Hz0 to 5mAµA100
81CH 1 current 2600HzCurrent measured at 2600Hz0 to 5mAµA100
91

CH 1 Spectrogram or Gain

Capture waveform showing the magnitude spectrum of the input signal. Use a "Triggered Capture" to acquire the Spectrogram.

1 to 32
1
102CH 2 FrequencyChannel 1 Frequency Selected1700 to 2600Hz1
112CH 2 Side Band RatioRatio of lower to upper frequency (0%=all lower, 100%=all upper)0 to 100%%5
122CH 2 Raw FrequencySimple Frequency Measurement (zero crossings)1600 to 2700Hz100
132CH 2 Total CurrentTotal current in the UM71 band0 to 5mAµA100
142CH 2 current 1700HzCurrent measured at 1700Hz0 to 5mAµA100
152CH 2 current 2000HzCurrent measured at 2000Hz0 to 5mAµA100
162CH 2 current 2300HzCurrent measured at 2300Hz0 to 5mAµA100
172CH 2 current 2600HzCurrent measured at 2600Hz0 to 5mAµA100
182

CH 2 Spectrogram or Gain

Capture waveform showing the magnitude spectrum of the input signal. Use a "Triggered Capture" to acquire the Spectrogram.

1 to 32
1

...