...
- The SA380TX can monitor 1 x Bender type IRDH265 / 365 insulation monitor.
- In addition to the isometer, volt-free contact outputs from Bender fault-evaluator devices (such as the SMO480) may also be connected the SA380TX general purpose digital inputs.
- If a 4-20mA output converters converter such as the RK170 is utilised, this can be connected to the SA380TX general purpose analogue inputs, although RS485 connection is preferred.
- Other models of Bender isometer may be supported over RS485 - check the Bender documentation to see if the RS485 protocol matches
- Please be aware that 1 x SA380TX can only monitor 1 x Bender Isometer. This is a limitation of the Bender protocol, not the SA380TX.
...