1.5T467-611

• modstate 3 unit can be manufactured with empty SD card, no internal disk flag file is needed.

1.5T453-611

• Automated detection and warnings if two "internal" disks are inserted into a device
• default MIMOSA device ID = 9998 in the event of internal disk failure. "Revert to default configuration" sets device ID = 0. Startup changes it to default 9998. Mimosa configuration dialog lets user to change the MIMOSA device ID to 0.
• Quadratic Sensor graphical display bug fix.
• TX reported serial number = 0 in secured HTTP header (Centrix Only)
• Can now support EbiTracks when the time is set incorrectly on the EbiTrack. The TX no longer attempts to set the time on EbiTracks, as they ignore the message.
• Ability to configure pushing of digital events from the touchscreen
• Added CCID (SIM ID) to the about box - added CCID to Syslog
• A slave device can now have 16 analogue channels each
• Max back off time is server controllable
• Minor performance tweaks
• Improved TCP transmission reliability
• Port 8080 completely depreciated - use port 80 only now.
• Separate Passwords for browsing data and configuring the device remotely
• EBITrack more tolerant of missed messages.
• Web Config version displayed on about box
• Brighter "traffic light" display for comms status
• Modem icon state has been fixed: YELLOW = modem on + registered
• Added Ethernet icon to the Master dialog
• GSM traffic light on Master dialog BLACK: GSM OFF RED: modem on, not registered YELLOW: modem on, registered, no packet data YELLOW/GREEN FLASH: modem on, registered, data connection active but in fallback GREEN: modem on,
• Addded VTI21 (VT1) sensor defaults
• Indicate State of DHCP on about screen