SA380TX Configuration
...
The unit can be upgraded to this version of firmware if required using dUpgrade, following the instructions found in the dUpgrade User Guide.
Contact MPEC for instructions on how to upgrade via USB.
Once the SA380TX is running the correct version of firmware, it must be configured to acquire data from the Aster VTI21 over 4-20mA and RS485 connections.
...
| Quantity | Units | Change Threshold | 4-20 mA | RS485 |
| CH1_Aster | Hz | 1 |
| |
| CH1_ICent | uA | 1050 | ||
| CH1_Freq | Hz | 1 | ||
| CH1_ITot | uA | 1050 | ||
| CH1_1700 | uA | 1050 | ||
| CH1_2000 | uA | 1050 | ||
| CH1_2300 | uA | 1050 | ||
| CH1_2600 | uA | 1050 | ||
| CH1_FFT | Not normally acquired | |||
| CH2_Aster | Hz | 1 | ||
| CH2_ICent | uA | 1050 | ||
| CH2_Freq | Hz | 1 | ||
| CH2_ITot | uA | 1050 | ||
| CH2_1700 | uA | 1050 | ||
| CH2_2000 | uA | 1050 | ||
| CH2_2300 | uA | 1050 | ||
| CH2_2600 | uA | 1050 | ||
| CH2_FFT | Not normally acquired |
...