Content Comparison

...

1. Set local IP address. (The slave units will be needed to be configured to connect to this IP address.)
   
   
   Press Menu:
   
   Press Configuration and enter passcode:
   
   Press Set local IP:
   
   Enter appropriate master IP address, subnet mask and default gateway. The default – and most usual – settings are:
   IP address: 10.0.1.1
   Subnet mask: 255.255.252.0
   Default gateway: 10.0.0.138
   Press Enter when finished.
   
   
2. Enter each slave unit's serial number to tell the master unit what slave data to anticipate.
   Go to configuration menu:
   Image Added
   Press RailDAQ master button:
   Image Added
   Enter the SA380 slave units' serial numbers, which are written onto the slave unit box or can be read on the touchscreen in the About box:
   Image Added
   When upgrading previous version of master/slave configuration, Slave 1 SA380 unit's IP address looks like: x.x.x.1, Slave 2 is x.x.x.2 etc.
   
   

Setting up SA380 slave unit:

...