...
| Syslog | Description | Example |
|---|---|---|
| System startup | First message after the logger boots. | System startup 1.5T444 29Oct14 serno=65532 |
| System shutdown | Usually the last message in the syslog before the logger powers down or restart. | no parameters |
| Daily status | Available disk space on each disks. Slave unit statuses. GPRS and dialup status. | Daily status dsk1:374M dsk2:Miss dsk3:Miss Master:Y Slaves:NNNNNNN RasDial:Disconnected RasServe:Enabled |
| Disk failed or not present | Internal or External disk. Internal disk is critical. SA380 needs external disk when used as juridical logger. | |
| Remote access heartbeat received | Remote client connected to the logger and retrieved site name and firmware version. | no parameters |
Enabling RAS server Disabling RAS server | Can be seen time-by-time in SA380 loggers to make sure the RAS server is not hung up in call. | no parameters |
The SA380TX-L logger has a few more messages worth including here.
| Syslog | Description | Example |
|---|---|---|
| Database started | Part of the normal startup. Version indicates data structure changes. | Database started Database File Manager version 0.2 |
| Slave configured | Slave processor got configuration. Optional parameters show available digital and analogue channels. | Slave configured AnaMask=0x0003, DigMask=0x0000000F |
| Slave has started logging | Started the slave processor logging cycle. It is not logging during configuration phase. | no parameters |
Errors
| Syslog | Description | Example |
|---|---|---|
| Thread stopped | Software failure or possible overload. (1) | thread=DiskLogger,state=8 |
| Thread safety system restart | Software failure or possible overload. (2) | no parameters |
| Unexpected disk removal | Error: only for Internal | |
| Battery level low at startup | Flat battery; battery is not charging. Let the logger charge the battery for a few hours. If the error still shows, send the logger back to MPEC for battery replacement. | 2.9V |
| Event receiver overflow | System is overloaded. (3) | |
| Could not delete folder | File system error? | |
| Could not create file | Important for SA380: must have external disk installed. | |
| Modem command failed | Serial port error; modem error. It is not an error during modem baud-rate detection! Try to restart communication on the logger. | missing echo |
| M Tx File processing failed | Slow comms (file has been removed since), file system error. Logger had no connection to the server long enough to fill the message queue in the meantime. Check in the syslog if the GPRS communication was lost for a long time. |
...