Page Comparison

...

I have a Mod State 1 or Mod State 2 device
I have a Mod State 3 or later device

...

Anchor

	Q2A
	Q2A

Q2: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?

My logger connects to Centrix
My logger connects to the Network Rail Intelligent Infrastructure system
My logger is not connected to any back-office asset management system

...

Anchor

	Q2B
	Q2B

Q2: What Firmware Version is your SA380TX currently running?

Help : How do I know which version of firmware I am running?

My logger is running a firmware version prior to "1319"
My logger is running firmware version "1319" or later

...

Anchor

	Q3A
	Q3A

Q3: How do you wish to apply the firmware upgrade?

On-site using a USB drive
Using dUpgrade running over an IP connection

...

Anchor

	Q3B
	Q3B

Q3: How do you wish to apply the firmware upgrade?

On-site using a USB drive
Using dUpgrade running over an IP connection

...

Anchor

	Q3C
	Q3C

Q3: How do you wish to apply the firmware upgrade?

On-site using a USB drive
Using dUpgrade running over an IP connection

...

Anchor

	Q3D
	Q3D

Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?

My logger connects to Centrix
My logger connects to the Network Rail Intelligent Infrastructure system
My logger is not connected to any back-office asset management system

...

Anchor

	Q3E
	Q3E

Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?

My logger connects to Centrix
My logger connects to the Network Rail Intelligent Infrastructure system
My logger is not connected to any back-office asset management system

...

Anchor

	Q4A
	Q4A

Q4: How do you wish to apply the firmware upgrade?

On-site using a USB drive
Using dUpgrade running over an IP connection

...

Anchor

	Q4B
	Q4B

Q4: How do you wish to apply the firmware upgrade?

On-site using a USB drive
Using dUpgrade running over an IP connection

...

Anchor

	Q4C
	Q4C

Q4: How do you wish to apply the firmware upgrade?

On-site using a USB drive
Using dUpgrade running over an IP connection

...

Anchor

	Q4D
	Q4D

Q4: How do you wish to apply the firmware upgrade?

On-site using a USB drive
Using dUpgrade running over an IP connection
Remotely using Centrix

...

Anchor

	Q4E
	Q4E

Q4: How do you wish to apply the firmware upgrade?

On-site using a USB drive
Using dUpgrade running over an IP connection

...

Anchor

	Q4F
	Q4F

Q4: How do you wish to apply the firmware upgrade?

On-site using a USB drive
Using dUpgrade running over an IP connection

...

Answers

...

Anchor

	A1
	A1

A1: Upgrading a Mod State 1 or Mod State 2 SA380TX with a USB drive, using the "Centrix Approved" .ZIP firmware package for USB drives

...

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS1/2
Firmware that is "Centrix Approved".
Pre-formatted to work with USB drives

Info
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

...

2) Follow the instructions for SA380TX - Firmware Upgrade from .ZIP files using a USB Drive using the firmware package just downloaded.

...

Anchor

	A3
	A3

A2: Upgrading a Mod State 1 or Mod State 2 SA380TX with dUpgrade, using the "Centrix Approved" .ZIP firmware package for dUpgrade

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS1/2
Firmware that is "Centrix Approved".
Pre-formatted to work with dUpgrade

Info
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

...

2) Follow the instructions for SA380TX - Firmware Upgrade using dUpgrade using the firmware package just downloaded.

...

Anchor

	A4
	A4

A3: Upgrading a Mod State 1 or Mod State 2 SA380TX with a USB drive, using the "NR-II Approved" .ZIP firmware package for USB drives

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:Image Removed

...

For SA380TX MS1/2
Firmware that is "NR II Approved".
Pre-formatted to work with USB drives

Info
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

...

2) Follow the instructions for SA380TX - Firmware Upgrade from .ZIP files using a USB Drive using the firmware package just downloaded.

...

Anchor

	A6
	A6

A4: Upgrading a Mod State 1 or Mod State 2 SA380TX with dUpgrade remotely, using the "NR-II Approved" .ZIP firmware package for dUpgrade

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS1/2
Firmware that is "NR II Approved".
Pre-formatted to work with dUpgrade

Info
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

...

2) Follow the instructions for SA380TX - Firmware Upgrade using dUpgrade using the firmware package just downloaded.

...

Anchor

	A7
	A7

A5: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using "Centrix Approved" .UPG firmware package

...

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS3+
Firmware that is labelled "Stepping Stone".
Pre-formatted to work with USB drives

2) Follow the instructions for SA380TX - Firmware Upgrade from .ZIP files using a USB Drive using the firmware package just downloaded.

...

3) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS3+
Firmware that is labelled "Centrix Approved".
Download the UPG File

Info
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

4) Follow the instructions for SA380TX - Firmware Upgrade from .UPG files using a USB Drive using the firmware package just downloaded.

...

Anchor

	A9
	A9

A6: Upgrading a Mod State 3 or later SA380TX by first using dUpgrade remotely to apply the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using Centrix to apply the "Centrix Approved" .UPG firmware package.

...

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS3+
Firmware that is labelled "Stepping Stone".
Pre-formatted to work with dUpgrade

2) Follow the instructions for SA380TX - Firmware Upgrade using dUpgrade using the firmware package just downloaded.

...

Anchor

	A10
	A10

A7: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using "NR-II Approved" .UPG firmware package

...

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS3+
Firmware that is labelled "Stepping Stone".
Pre-formatted to work with USB drives

2) Follow the instructions for SA380TX - Firmware Upgrade from .ZIP files using a USB Drive using the firmware package just downloaded.

...

3) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS3+
Firmware that is labelled "NR-II Approved".
Download the UPG File

Info
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

4) Follow the instructions for SA380TX - Firmware Upgrade from .UPG files using a USB Drive using the firmware package just downloaded.

...

Anchor

	A12
	A12

A8: Upgrading a Mod State 3 or later SA380TX with dUpgrade remotely, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using "NR-II Approved" .UPG firmware package

...

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS3+
Firmware that is labelled "Stepping Stone".
Pre-formatted to work with dUpgrade

2) Follow the instructions for SA380TX - Firmware Upgrade using dUpgrade using the firmware package just downloaded.

3) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS3+
Firmware that is labelled "NR-II Approved".
Download the UPG File

Info
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

4) Follow the instructions for SA380TX - Firmware Upgrade using dUpgrade using the firmware package just downloaded.

...

Anchor

	A13
	A13

A9: Upgrading a Mod State 3 or later SA380TX with a USB drive, using the "Centrix Recommended" .UPG firmware package

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS3+
Firmware that is labelled "Centrix Approved".
Download the UPG File

Info
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

2) Follow the instructions for SA380TX - Firmware Upgrade from .UPG files using a USB Drive using the firmware package just downloaded.

...

Anchor

	A15
	A15

A10: Upgrading a Mod State 3 or later SA380TX with Centrix, using the "Centrix Recommended" .UPG firmware package

Firmware Upgrade is fully integrating into the Centrix platform, follow the instructions for SA380TX - Firmware Upgrade using Centrix to perform the the upgrade

...

Anchor

	A16
	A16

A11: Upgrading a Mod State 3 or later SA380TX with a USB drive, using the "NR-II Approved" .UPG firmware package

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS3+
Firmware that is labelled "NR-II Approved".
Download the UPG File

Info
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

2) Follow the instructions for SA380TX - Firmware Upgrade from .UPG files using a USB Drive using the firmware package just downloaded.

...

Anchor

	A18
	A18

A12: Upgrading a Mod State 3 or later SA380TX with dUpgrade remotely, using the "NR-II Approved" .UPG firmware package

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

For SA380TX MS3+
Firmware that is labelled "NR-II Approved".
Download the UPG File

Info
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

...

Versions Compared

Old Version 51

New Version 52

Key

Answers