These pages are designed to steer you towards the correct instructions for upgrading your SA380TX data logger such that is running the optimal firmware for its operating environmnet.
Already know how you want to proceed?
Use the links below to jump striaght to the relevent article, or the Mpec firmware downloads Page
Unsure how to proceed?
Answer the questions below and you shall be steered towards the correct procedure:
Questions:
Q1: Are you trying to upgrade a pre-Mod State 3 device, or a Mod State 3 onward device?
How do I find my mod state?
I have a Mod State 1 or Mod State 2 device ->Q2A
I have a Mod State 3 or later device →Q2B
Q2: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?
My logger connects to Centrix - >Q3A
My logger connects to the Network Rail Intelligent Infrastructure system. ->Q3B
My logger is not connected to any back-office asset management system →Q3C
Q2: What Firmware Version is your SA380TX currently running?
How do I know which version of firmware I am running?
My logger is running a firmware version prior to "1144" ->Q3D
My logger is running firmware version "1144" or later →Q3E
Q3: How do you wish to apply the firmware upgrade?
On-site using a USB drive -> A1
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A2
Remotely using dUpgrade running over an IP network → A3
Q3: How do you wish to apply the firmware upgrade?
On-site using a USB drive -> A4
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A5
Remotely using dUpgrade running over an IP network → A6
Q3: How do you wish to apply the firmware upgrade?
On-site using a USB drive -> A1
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A2
Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?
My logger connects to Centrix - >Q4A
My logger connects to the Network Rail Intelligent Infrastructure system. ->Q4B
My logger is not connected to any back-office asset management system →Q4C
Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?
My logger connects to Centrix - >Q4D
My logger connects to the Network Rail Intelligent Infrastructure system. ->Q4E
My logger is not connected to any back-office asset management system →Q4F
Q4: How do you wish to apply the firmware upgrade?
On-site using a USB drive -> A7
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A8
Remotely using dUpgrade running over an IP network → A9
Q4: How do you wish to apply the firmware upgrade?
On-site using a USB drive -> A10
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A11
Remotely using dUpgrade running over an IP network → A12
Q4: How do you wish to apply the firmware upgrade?
On-site using a USB drive -> A7
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A8
Q4: How do you wish to apply the firmware upgrade?
On-site using a USB drive -> A13
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A14
Remotely using Centrix → A15
Q4: How do you wish to apply the firmware upgrade?
On-site using a USB drive -> A16
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A17
Remotely using dUpgrade running over an IP network → A18
Q4: How do you wish to apply the firmware upgrade?
On-site using a USB drive -> A13
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A14
Answers
A1: Upgrading a Mod State 1 or 2 SA380TX with a USB drive, using the "Centrix Recomended" .ZIP firmware package for USB drives
A2: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade locally, using the "Centrix Recomended" .ZIP firmware package for dUpgrade
A3: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade remotely, using the "Centrix Recomended" .ZIP firmware package for dUpgrade
A4: Upgrading a Mod State 1 or 2 SA380TX with a USB drive, using the "NR-II Approved" .ZIP firmware package for USB drives
A5: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade locally, using the "NR-II Approved" .ZIP firmware package for dUpgrade
A6: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade remotely, using the "NR-II Approved" .ZIP firmware package for dUpgrade
A7: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using "Centrix Recomended" .UPG firmware package
A8: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using "Centrix Recomended" .UPG firmware package
A9: Upgrading a Mod State 3 or later SA380TX by first using dUpgrade remotely to apply the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using Centrix to apply the "Centrix Recomended" .UPG firmware package.
A10: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using "NR-II Approved" .UPG firmware package
A11: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using "NR-II Approved" .UPG firmware package
A12: Upgrading a Mod State 3 or later SA380TX with dUpgrade remotely, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using "NR-II Approved" .UPG firmware package
A13: Upgrading a Mod State 3 or later SA380TX with a USB drive, using the "Centrix Recomended" .UPG firmware package
A14: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, using the "Centrix Recomended" .UPG firmware package
A15: Upgrading a Mod State 3 or later SA380TX with Centrix, using the "Centrix Recomended" .UPG firmware package
A16: Upgrading a Mod State 3 or later SA380TX with a USB drive, using the "NR-II Approved" .UPG firmware package
A17: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, using the "NR-II Approved" .UPG firmware package
A18: Upgrading a Mod State 3 or later SA380TX with dUpgrade remotely, using the "NR-II Approved" .UPG firmware package