This page is designed to steer you towards the correct instructions for upgrading your SA380TX-L data logger such that is running the optimal firmware for its operating environment.
This applies to all modstates of the TX-L |
Platform | <2699 | ≥2699 | 2792 |
---|---|---|---|
Centrix Upgrade to | Use ZIP file: On site over USB using dPanel. | Use UPG file Upgrade via Centrix. On site over USB using dPanel. | |
NR II / RADAR (Private APN with IP access) Upgrade to | Use ZIP file: On site over USB using dPanel. Remotely using dPanel / web config pages Remotely using dUpgrade | Use UPG file: On site over USB using dPanel. Remotely using dPanel / web config pages Remotely using dUpgrade |
If you’re upgrading remotely from Centrix, you can skip this step! |
Based on the target firmware and upgrade method, download the appropriate file from the firmware downloads page.
SeeSA380TX-L Configuration & diagnostics software (bottom of page)
Open the loggers web config pages in your web browser
Navigate to the “Commands” tab and press “Select File…”
Choose the appropriate file for the firmware vintage (ZIP if <2699, otherwise UPG)
Press the “Upgrade” button.
Navigate to the logger page and select the “Firmware” tab.
Click on the latest “Centrix Approved” firmware, and press “Ok”
If you do not see the “Firmware” tab on the logger’s page:
Please contact support for assistance. |