This page is designed to steer you towards the correct instructions for upgrading your SA380TX data logger such that is running the optimal firmware for its operating environmnet.
Already know how you want to proceed?
Use the links below to jump striaght to the relevent article, or the Mpec firmware downloads Page
SA380TX - Firmware Upgrade from .ZIP files using a USB Drive
Unsure how to proceed?
Answer the questions below and you shall be steered towards the correct procedure:
Questions:
Q1: Are you trying to upgrade a pre-Mod State 3 device, or a Mod State 3 onward device?
Help: How do I find my mod state?
Q2: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?
- My logger connects to Centrix
- My logger connects to the Network Rail Intelligent Infrastructure system
- My logger is not connected to any back-office asset management system
Q2: What Firmware Version is your SA380TX currently running?
Help : How do I know which version of firmware I am running?
- My logger is running a firmware version prior to "1144"
- My logger is running firmware version "1144" or later
Q3: How do you wish to apply the firmware upgrade?
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using dUpgrade running over an IP network
Q3: How do you wish to apply the firmware upgrade?
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using dUpgrade running over an IP network
Q3: How do you wish to apply the firmware upgrade?
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?
- My logger connects to Centrix
- My logger connects to the Network Rail Intelligent Infrastructure system
- My logger is not connected to any back-office asset management system
Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?
- My logger connects to Centrix
- My logger connects to the Network Rail Intelligent Infrastructure system
- My logger is not connected to any back-office asset management system
Q4: How do you wish to apply the firmware upgrade?
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using dUpgrade running over an IP network
Q4: How do you wish to apply the firmware upgrade?
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using dUpgrade running over an IP network
Q4: How do you wish to apply the firmware upgrade?
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
Q4: How do you wish to apply the firmware upgrade?
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using Centrix
Q4: How do you wish to apply the firmware upgrade?
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using dUpgrade running over an IP network
Q4: How do you wish to apply the firmware upgrade?
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
Answers
A1: Upgrading a Mod State 1 or Mod State 2 SA380TX with a USB drive, using the "Centrix Approved" .ZIP firmware package for USB drives
1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:
- For SA380TX MS1/2
- Firmware that is "Centrix Approved".
- Pre-formated to work with USB drives
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.
2) Follow the instructions for SA380TX - Firmware Upgrade from .ZIP files using a USB Drive using the firmware package just downloaded.
A2: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade locally, using the "Centrix Recomended" .ZIP firmware package for dUpgrade
A3: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade remotely, using the "Centrix Recomended" .ZIP firmware package for dUpgrade
A4: Upgrading a Mod State 1 or 2 SA380TX with a USB drive, using the "NR-II Approved" .ZIP firmware package for USB drives
A5: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade locally, using the "NR-II Approved" .ZIP firmware package for dUpgrade
A6: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade remotely, using the "NR-II Approved" .ZIP firmware package for dUpgrade
A7: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using "Centrix Recomended" .UPG firmware package
A8: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using "Centrix Recomended" .UPG firmware package
A9: Upgrading a Mod State 3 or later SA380TX by first using dUpgrade remotely to apply the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using Centrix to apply the "Centrix Recomended" .UPG firmware package.
A10: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using "NR-II Approved" .UPG firmware package
A11: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using "NR-II Approved" .UPG firmware package
A12: Upgrading a Mod State 3 or later SA380TX with dUpgrade remotely, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using "NR-II Approved" .UPG firmware package
A13: Upgrading a Mod State 3 or later SA380TX with a USB drive, using the "Centrix Recomended" .UPG firmware package
A14: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, using the "Centrix Recomended" .UPG firmware package
A15: Upgrading a Mod State 3 or later SA380TX with Centrix, using the "Centrix Recomended" .UPG firmware package
A16: Upgrading a Mod State 3 or later SA380TX with a USB drive, using the "NR-II Approved" .UPG firmware package
A17: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, using the "NR-II Approved" .UPG firmware package
A18: Upgrading a Mod State 3 or later SA380TX with dUpgrade remotely, using the "NR-II Approved" .UPG firmware package