If you're having trouble with upgrading firmware, please do not hesitate to Contact Mpec.

Overview

You will need the smallest USB flash drive you can get, about 1–2 GB. Note larger drives may not function correctly with the logger.

Make sure the USB flash drive is FAT formatted (Format with Windows) and empty.
Download the appropriate upg firmware package from https://centrix.org/downloads
Copy the .upg file to the root folder to the USB flash drive.
Insert the USB flash drive into the SA380TX logger.
Navigate to Superuser config dialog on the logger's touch-screen (by entering 62009 at the "enter passcode" prompt).
Press Update firmware button.
Confirm the copy process succeeded.
Press Save & restart button.
Wait for logger to restart and confirm new firmware version in the About screen.
Eject USB flash disk on the touch-screen

Upgrading Multiple Loggers?

The SA380TX will remove the firmware from the USB disk as part of the process. Step 3 above must be repeated for each upgrade.

Detailed Instructions

Make sure the USB flash drive is FAT formatted and empty:

Right click on USBSTICK and select format from the pop-up menu:

Visit https://centrix.org/downloads to download the appropriate firmware package, if you have not already done so.

This instructions on this page are written for firmware packages having UPG package for dUpgrade and USB disk in their description.

Unsure which package to download? Check the guide found here.

Open the downloaded ZIP package.

Eject the USB flash drive.

Note the "Change USB disk" button will become active on the main dialog when the SA380TX recognises that a USB disk has been inserted!