| Info | ||
|---|---|---|
| ||
If you're having trouble with upgrading firmware, please do not hesitate to Contact Mpec. |
...
- Make sure the USB flash drive is FAT formatted (Format with Windows) and empty.
- Download the appropriate firmware package from https://centrix.org/downloads
Info title Which Firmware Do I Need? If you are unsure which firmware version you require, please consult the following guidance SA380TX Firmware Upgrade Support
- Copy the sw/ and config/ folders from the downloaded archive to the USB pen drive.
- Insert the USB flash drive into the SA380TX logger.
- Navigate to Superuser config dialog on the logger's touch-screen (by entering 62009 at the "enter passcode" prompt).
- Press Update firmware button.
- Confirm the copy process succeeded.
- Press Save & restart button.
- Wait for logger to restart and confirm new firmware version in the About screen.
- Eject USB flash disk on the touch-screen
...
Visit https://centrix.org/downloads to download the appropriate firmware package, if you have not already done so.
This instructions on this page are written for firmware packages having ZIP package for USB disk in their description
| Info |
|---|
Unsure which package to download? Check the guide found here. |
Scroll down to the appropriate firmware package: SA380TX [MS3+].
Download the ZIP package for updating loggers via USB package.
3. Copy files to USB flash drive
Open the downloaded ZIP package.
Navigate to through the top-level folders until you see two folders names sw/ and config/ folders.
Select both config/ and sw/ folders and copy them (Ctrl+C or select from right-click menu).
Navigate to USB flash drive and paste them into the root directory of the drive.
Eject the USB flash drive.
...
5. Navigate to Superuser config
enter 62009:
...
| Info |
|---|
Note the "Change USB disk" button will become active on the main dialog |
...
when the |
...
SA380TX recognises that a USB disk has been inserted! |
Navigate to Menu→Configuration and enter 62009:
6. Update firmware
...