| Info | ||
|---|---|---|
| ||
If you're having trouble with upgrading firmware, please do not hesitate to Contact Mpec. |
Overview
You will need the smallest USB flash drive you can get, about 1–2 GB. Note larger drives may not function correctly with the logger.
...
- Make sure the USB flash drive is FAT formatted (Format with Windows) and empty.
- Download the appropriate upg firmware package from https://centrix.org/downloads
Info title Which Firmware Do I Need? If you are unsure which firmware version you require, please consult the following guidance SA380TX Firmware Upgrade Support
- Copy the .upg file to the root folder to the USB flash drive.
- Insert the USB flash drive into the SA380TX logger.
- Navigate to Superuser config dialog on the logger's touch-screen (by entering 62009 at the "enter passcode" prompt).
- Press Update firmware button.
- Confirm the copy process succeeded.
- Press Save & restart button.
- Wait for logger to restart and confirm new firmware version in the About screen.
- Eject USB flash disk on the touch-screen
...
Unsure which package to download? Check the guide found here.
3. Copy
...
UPG file to USB flash drive
Open the downloaded ZIP package.your browsers downloads folder and copy the upg file to the root directory of your USB drive.
Eject the USB flash drive from your PC.
4. Insert the USB flash drive into the logger
...
7. Confirm copy succeeded
...
Please be patient - It may take up to 2 minutes for the copy operation to complete and the text to appear in the box highlighted below.
8. Save and restart
...
If the logger doesn't automatically restart at this stage, a manual restart should be performed by selecting "Shut down" in the options menu.
9. Confirm new version
Navigate to the "About" dialog.
...