Versions Compared

Old Version 44

changes.mady.by.user Mark Beeson (Deactivated)

Saved on

compared with

New Version 45

changes.mady.by.user Mark Beeson (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

3) After firmware upgrade to the "stepping stone" version is complete, follow the instructions for SA380TX - Firmware Upgrade using Centrix


...







Anchor
A10
A10
A10A7: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using  "NR-II Approved" .UPG firmware package

...

4) Follow the instructions for SA380TX - Firmware Upgrade from .UPG files using a USB Drive using the firmware package just downloaded.



...




Anchor
A12
A12
A12A8: Upgrading a Mod State 3 or later SA380TX with dUpgrade remotely, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using  "NR-II Approved" .UPG firmware package

As of firmware release 1144, The SA380TX now supports the universal Mpec UPG firmware file format. In order to be able to use this new file format, you will have to first upgrade your firmware via a "stepping stone" version. After which, a further upgrade is required using the new UPG file.


1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

Image Added

  • For SA380TX MS3+
  • Firmware that is labelled "Stepping Stone".
  • Pre-formatted to work with dUpgrade

2) Follow the instructions for SA380TX - Firmware Upgrade using dUpgrade using the firmware package just downloaded.

3) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

Image Added

  • For SA380TX MS3+
  • Firmware that is labelled "NR-II Approved".
  • Download the UPG File


Info

New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

4) Follow the instructions for SA380TX - Firmware Upgrade using dUpgrade using the firmware package just downloaded.

...


Anchor
A13
A13
A13: Upgrading a Mod State 3 or later SA380TX with a USB drive,  using the "Centrix Recomended" .UPG firmware package

...

Anchor
A15
A15
A15: Upgrading a Mod State 3 or later SA380TX  with Centrix, using the "Centrix RecomendedRecommended" .UPG firmware package


...


Anchor
A16
A16
A16: Upgrading a Mod State 3 or later SA380TX with a USB drive, using the "NR-II Approved" .UPG firmware package

...