...
- For SA380TX MS1/2
- Firmware that is "Centrix Approved".
- Pre-formated to formatted to work with USB drives
| Info |
|---|
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package. |
...
- For SA380TX MS1/2
- Firmware that is "Centrix Approved".
- Pre-formated to formatted to work with dUpgrade
| Info |
|---|
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package. |
...
- For SA380TX MS1/2
- Firmware that is "NR II Approved".
- Pre-formated to formatted to work with USB drives
| Info |
|---|
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package. |
...
- For SA380TX MS1/2
- Firmware that is "NR II Approved".
- Pre-formated to formatted to work with dUpgrade
| Info |
|---|
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package. |
...
- For SA380TX MS3+
- Firmware that is labelled "Stepping Stone".
- Pre-formated to formatted to work with USB drives
| Info |
|---|
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package. |
...
- For SA380TX MS3+
- Firmware that is labelled "Centrix Approved".
- Download the UPG File
4) Follow the instructions for SA380TX - Firmware Upgrade from .UPG files using a USB Drive using the firmware package just downloaded.
...
A9: Upgrading a Mod State 3 or later SA380TX by first using dUpgrade remotely to apply the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using Centrix to apply the "Centrix Recomended" .UPG firmware package.Anchor A9 A9
...