Versions Compared

Old Version 36

changes.mady.by.user Mark Beeson (Deactivated)

Saved on

compared with

New Version 37

changes.mady.by.user Mark Beeson (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Anchor
A7
A7
A5: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using "Centrix RecomendedApproved" .UPG firmware package


As of firmware release 1144, The SA380TX now supports the universal Mpec UPG firmware file format. In order to be able to use this new file format, you will have to first upgrade your firmware via a "stepping stone" version. After which, a further upgrade is required using the new UPG file.


1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

...

2) Follow the instructions for SA380TX - Firmware Upgrade from .ZIP files using a USB Drive using the firmware package just downloaded.

3) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

Image Added

  • For SA380TX MS3+
  • Firmware that is labelled "Centrix Approved".
  • Download the UPG File





...


Anchor
A9
A9
A9: Upgrading a Mod State 3 or later SA380TX by first using dUpgrade remotely to apply the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using Centrix to apply the "Centrix Recomended" .UPG firmware package.

...