...
| Code Block |
|---|
10.0.4.64, 10.0.4.65, 10.0.4.66 |
Type them in
Select from a file
Query Loggers
Get the correct firmware package
Open the package
...
Query Loggers
To confirm that SA380TX devices are available for upgrade, you should, but are not required use the Query loggers button to check that there is a device available on the IP address you entered that is the device you are expecting, and available on the network.
dUpgrade will return the site name, firmware version, and datalogger type for each IP address, if a device with a matching IP address is found.
Upgrade the SA380TX
Get the correct firmware package
The first stage is to ensure you have the correcr firmware package from the Mpec Firmware Downloads Page.
If you are unsure which firmware pacakage is required, please follow the step-by-step guide found here: SA380TX Firmware Upgrade Support
Open the Firmware Package
Using the Open Firmware Package... button, select the .ZIP package you just downloaded.
dUpgrade will detect the data logger type and firmware version contained within the ZIP file. If dUpgrade fails to detect a valid firmware image, it is indicative of the wrong package being downloaded from the website.
Upgrade Loggers
To actually perform the upgrade, simply his the Upgrade loggers button.
| Info |
|---|
Firmware Upgrade can take a very long time, especially on 2G GSM connections! Please be patient. |
dUpgrade is persistant. It shall continue to attempt upgrade until upgrade is complete. If you wish to abort you must press the Cancel Upgrade button during the upgrade process.
Upon successfull upgrade, the Status for each SA380TX logger shall say Complete
