Page Comparison

Versions Compared

Key

This line was added.
This line was removed.
Formatting was changed.

This page is designed to steer you towards the correct instructions for upgrading your SA380TX data logger such that is running the optimal firmware for its operating environmnet.

Already know how you want to proceed?

Use the links below to jump striaght to the relevent article, or the Mpec firmware downloads Page

Mpec Firmware Downloads Page

SA380TX - Firmware Upgrade from .ZIP files using a USB Drive

Unsure how to proceed?

Answer the questions below and you shall be steered towards the correct procedure:

Questions:

Q1: Are you trying to upgrade a pre-Mod State 3 device, or a Mod State 3 onward device?

Help: How do I find my mod state?

Anchor

	Q2A
	Q2A

Q2: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?

Anchor

	Q2B
	Q2B

Q2: What Firmware Version is your SA380TX currently running?

Help : How do I know which version of firmware I am running?

Anchor

	Q3A
	Q3A

Q3: How do you wish to apply the firmware upgrade?

Anchor

	Q3B
	Q3B

Q3: How do you wish to apply the firmware upgrade?

Anchor

	Q3C
	Q3C

Q3: How do you wish to apply the firmware upgrade?

Anchor

	Q3D
	Q3D

Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?

Anchor

	Q3E
	Q3E

Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?

Anchor

	Q4A
	Q4A

Q4: How do you wish to apply the firmware upgrade?

Anchor

	Q4B
	Q4B

Q4: How do you wish to apply the firmware upgrade?

Anchor

	Q4C
	Q4C

Q4: How do you wish to apply the firmware upgrade?

Anchor

	Q4D
	Q4D

Q4: How do you wish to apply the firmware upgrade?

Anchor

	Q4E
	Q4E

Q4: How do you wish to apply the firmware upgrade?

Anchor

	Q4F
	Q4F

Q4: How do you wish to apply the firmware upgrade?

Answers

Anchor

	A1
	A1

A1: Upgrading a Mod State 1 or Mod State 2 SA380TX with a USB drive, using the "Centrix Approved" .ZIP firmware package for USB drives

1) Visit the Mpec Firmware Downloads Page and download the firmware package with the following properties:

For SA380TX MS1/2
Firmware that is "Centrix Approved".
Pre-formated to work with USB drives

Info
New firmware is released regularly, and approval status may change. Following the guidance above will always steer you towards the correct firmware package.

2) Follow the instructions for SA380TX - Firmware Upgrade from .ZIP files using a USB Drive using the firmware package just downloaded.

Anchor

	A2
	A2

A2: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade locally, using the "Centrix Recomended" .ZIP firmware package for dUpgrade

Anchor

	A3
	A3

A3: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade remotely, using the "Centrix Recomended" .ZIP firmware package for dUpgrade

Anchor

	A4
	A4

A4: Upgrading a Mod State 1 or 2 SA380TX with a USB drive, using the "NR-II Approved" .ZIP firmware package for USB drives

Anchor

	A5
	A5

A5: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade locally, using the "NR-II Approved" .ZIP firmware package for dUpgrade

Anchor

	A6
	A6

A6: Upgrading a Mod State 1 or 2 SA380TX with dUpgrade remotely, using the "NR-II Approved" .ZIP firmware package for dUpgrade

Anchor

	A7
	A7

A7: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using "Centrix Recomended" .UPG firmware package

Anchor

	A8
	A8

A8: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using "Centrix Recomended" .UPG firmware package

Anchor

	A9
	A9

A9: Upgrading a Mod State 3 or later SA380TX by first using dUpgrade remotely to apply the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using Centrix to apply the "Centrix Recomended" .UPG firmware package.

Anchor

	A10
	A10

A10: Upgrading a Mod State 3 or later SA380TX with a USB drive, first using the "Stepping Stone" .ZIP firmware package for USB drives ,then using "NR-II Approved" .UPG firmware package

Anchor

	A11
	A11

A11: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using "NR-II Approved" .UPG firmware package

Anchor

	A12
	A12

A12: Upgrading a Mod State 3 or later SA380TX with dUpgrade remotely, first using the "Stepping Stone" .ZIP firmware package for dUpgrade ,then using "NR-II Approved" .UPG firmware package

Anchor

	A13
	A13

A13: Upgrading a Mod State 3 or later SA380TX with a USB drive, using the "Centrix Recomended" .UPG firmware package

Anchor

	A14
	A14

A14: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, using the "Centrix Recomended" .UPG firmware package

Anchor

	A15
	A15

A15: Upgrading a Mod State 3 or later SA380TX with Centrix, using the "Centrix Recomended" .UPG firmware package

Anchor

	A16
	A16

A16: Upgrading a Mod State 3 or later SA380TX with a USB drive, using the "NR-II Approved" .UPG firmware package

Anchor

	A17
	A17

A17: Upgrading a Mod State 3 or later SA380TX with dUpgrade locally, using the "NR-II Approved" .UPG firmware package

Anchor

	A18
	A18

A18: Upgrading a Mod State 3 or later SA380TX with dUpgrade remotely, using the "NR-II Approved" .UPG firmware package