Page Comparison

Versions Compared

Key

This line was added.
This line was removed.
Formatting was changed.

Info
If you're having trouble with upgrading firmware, please do not hesitate to Contact Mpec.

Overview

You will need the smallest USB flash drive you can get, about 1–2 GB. Note larger drives may not function correctly with the logger.

Make sure the USB flash drive is FAT formatted (Format with Windows) and empty.
Download the appropriate firmware package from https://centrix.org/downloads
Copy the sw/ and config/ folders from the downloaded archive to the USB pen drive.
Insert the USB flash drive into the SA380TX logger.
Navigate to Superuser config dialog on the logger's touch-screen (by entering 62009 at the "enter passcode" prompt).
Press Update firmware button.
Confirm the copy process succeeded.
Press Save & restart button.
Wait for logger to restart and confirm new firmware version in the About screen.
Eject USB flash disk on the touch-screen

Warning

title	Upgrading Multiple Loggers?

The SA380TX will remove the firmware from the USB disk as part of the process. Step 3 above must be repeated for each upgrade.

Detailed Instructions

1. Prepare a USB flash drive

Make sure the USB flash drive is FAT formatted and empty:

Image Added

Right click on USBSTICK and select format from the pop-up menu:

Image Added

2. Download firmware

Visit https://centrix.org/downloads

Image Added

Scroll down to the appropriate firmware package: SA380TX [MS3+].

Download the ZIP package for updating loggers via USB package.

Image Added

3. Copy files to USB flash drive

Open the downloaded ZIP package.

Image Added

Navigate to sw/ and config/ folders.

Image Added

Select config/ and sw/ folders and copy them (Ctrl+C or select from right-click menu).

Navigate to USB flash drive and paste them.

Image Added

Eject the USB flash drive.

4. Insert the USB flash drive into the logger

Image Added

5. Navigate to Superuser config

Image Added Image Added Image Added

enter 62009:

Image Added Image Added

Note the "Change USB disk" button will become active on the main dialog because the logger recognised that a USB disk has been inserted!

6. Update firmware

Image Added

7. Confirm copy succeeded

Image Added

8. Save and restart

Image Added

9. Confirm new version

Navigate to the "About" dialog.

Image Added Image Added Image Added

10. Eject USB

Image Added Image Added Image Added

You may now safely remove the USB drive.