...
How do I know which version of firmware I am running?
- My logger is running a firmware version prior to "1144"
- My logger is running firmware version "1144" or later
...
Q3: How do you wish to apply the firmware upgrade?Anchor Q3A Q3A
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using dUpgrade running over an IP network
...
Q3: How do you wish to apply the firmware upgrade?Anchor Q3B Q3B
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using dUpgrade running over an IP network
...
Q3: How do you wish to apply the firmware upgrade?Anchor Q3C Q3C
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
...
Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?Anchor Q3D Q3D
- My logger connects to Centrix
- My logger connects to the Network Rail Intelligent Infrastructure system
- My logger is not connected to any back-office asset management system
...
Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?Anchor Q3E Q3E
- My logger connects to Centrix
- My logger connects to the Network Rail Intelligent Infrastructure system
- My logger is not connected to any back-office asset management system
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4A Q4A
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using dUpgrade running over an IP network
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4B Q4B
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using dUpgrade running over an IP network
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4C Q4C
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4D Q4D
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using Centrix
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4E Q4E
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
- Remotely using dUpgrade running over an IP network
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4F Q4F
- On-site using a USB drive
- On-site using a wired Ethernet connection using dUpgrade software running on a laptop
...
Answers
...
A1: Upgrading a Mod State 1 or 2 SA380TX with a USB drive, using the "Centrix Recomended" .ZIP firmware package for USB drivesAnchor A1 A1
...