...
I have a Mod State 1 or Mod State 2 device ->Q2A
I have a Mod State 3 or later device →Q2Bdevice
...
Q2: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?Anchor Q2A Q2A
My logger connects to Centrix - >Q3A
My logger connects to the Network Rail Intelligent Infrastructure system. ->Q3B
My logger is not connected to any back-office asset management system →Q3Csystem
...
Q2: What Firmware Version is your SA380TX currently running?Anchor Q2B Q2B
How do I know which version of firmware I am running?
My logger is running a firmware version prior to "1144" ->Q3D
My logger is running firmware version "1144" or later →Q3Elater
...
Q3: How do you wish to apply the firmware upgrade?Anchor Q3A Q3A
On-site using a USB drive -> A1
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A2laptop
Remotely using dUpgrade running over an IP network → A3network
...
Q3: How do you wish to apply the firmware upgrade?Anchor Q3B Q3B
On-site using a USB drive -> A4
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A5laptop
Remotely using dUpgrade running over an IP network → A6network
...
Q3: How do you wish to apply the firmware upgrade?Anchor Q3C Q3C
On-site using a USB drive -> A1
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A2laptop
...
Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?Anchor Q3D Q3D
My logger connects to Centrix - >Q4A
My logger connects to the Network Rail Intelligent Infrastructure system. ->Q4B
My logger is not connected to any back-office asset management system →Q4Csystem
...
Q3: Is your logger deployed on Centrix, or the Network Rail Intelligent Infrastructure system?Anchor Q3E Q3E
My logger connects to Centrix - >Q4D
My logger connects to the Network Rail Intelligent Infrastructure system. ->Q4E
My logger is not connected to any back-office asset management system →Q4Fsystem
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4A Q4A
On-site using a USB drive -> A7
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A8laptop
Remotely using dUpgrade running over an IP network → A9network
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4B Q4B
On-site using a USB drive -> A10
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A11laptop
Remotely using dUpgrade running over an IP network → A12network
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4C Q4C
On-site using a USB drive -> A7
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A8laptop
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4D Q4D
On-site using a USB drive -> A13
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A14laptop
Remotely using Centrix → A15
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4E Q4E
On-site using a USB drive -> A16
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A17laptop
Remotely using dUpgrade running over an IP network → A18network
...
Q4: How do you wish to apply the firmware upgrade?Anchor Q4F Q4F
On-site using a USB drive -> A13
On-site using a wired Ethernet connection using dUpgrade software running on a laptop → A14laptop
...
Answers
...
A1: Upgrading a Mod State 1 or 2 SA380TX with a USB drive, using the "Centrix Recomended" .ZIP firmware package for USB drivesAnchor A1 A1
...