S-LX System Specifications
Electrical |
|
|---|---|
Serial Input (Non-Intrusive) | 1 x RS232 Full-Duplex 3-Wire Input - 57.6 kbps Max. |
Multipurpose Serial Input (Intrusive) | 2 x RS232/422/485 Software Selectable 921.6 kbps Max. |
Ethernet | 2 x 10/100 Mbps MDIX - RJ45 |
USB | 1 x USB 2.0 Host - Type A Connector |
Cellular | LTE (4G) Modem with 3G fall-back |
Supply Voltage | 85 V to 250 V AC |
Power Consumption | 10 W Max |
Wire Gauge for Power Supply Inputs. | 2.5 mm sq. Max. |
Further detailed specifications for S-LX compute & HZS PSU/Isolation module can be found below.
General Arrangement Drawings
...
S-LX Module Specification
Electrical |
|
|---|---|
CPU | ARM7 Cortex A8 1 GHz |
RAM | 512 MB DDR3 DRAM |
OS | Debian Industrial Linux |
Ethernet | 2 x 10/100 Mbps MDIX - RJ45 |
Serial | 2 x RS232/422/485 Software Selectable 921.6 kbps Max. |
USB* | 1 x USB 2.0 Host - Type A Connector |
Cellular | LTE (4G) Modem with 3G fall-back |
SIM | Standard Mini SIM |
Storage | 8 GB eMMC onboard 1 GB Industrial SD Card |
Input Voltage | 12 V to 24 V DC |
Power Consumption | 5.4 W Max |
Isolation | > 4 MΩ at 1,000 V DC |
Indications | Power, Storage, Connectivity, USB, Run, Fault, Signal Strength |
*Where USB hubs are utilised, these hubs must also be Network Rail Type Approved for Monitoring Applications.
Mechanical | |
|---|---|
Length | 129 mm |
Width | 27 mm |
Depth | 101 mm |
Weight | 230 g |
Mounting | DIN Rail |
Environmental Ratings |
|
|---|---|
IP Rating | 2X |
IK Rating | 06 |
Temperature Range | -5 to +55 °C |
Flammability | UL94-V0 |
Environmental | EN 50125-3 |
EMC | EN 50121-4 |
HZS Module Specification
Electrical |
|
|---|---|
Serial Input | 1 x RS232 Full-Duplex 3-Wire Input |
Serial Output | 2 x RS485 Half-Duplex 2-Wire Output |
Baud Rate | 57,600 bps max. |
Input Impedance | > 1 MΩ on both RS232 TX and RX Lines |
Power Supply | 85 V to 250 V AC |
Power Consumption | 0.6 W (HZS Module Only) |
Output Voltage | 12 V DC +/- 5% |
Maximum Output Load | 9 W |
Isolation | > 4 MΩ at 1,000 V DC |
Indications | Power, TX Active, RX Active |
Mechanical | |
|---|---|
Length | 129 mm |
Width | 27 mm |
Depth | 101 mm |
Weight | 370 g |
Mounting | DIN Rail |
Environmental Ratings |
|
|---|---|
IP Rating | 3X |
IK Rating | 06 |
Temperature Range | -5 to +55 °C |
Flammability | UL94-V0 |
Environmental | EN 50125-3 |
EMC | EN 50121-4 |
Creepage & Clearance | EN 50124-1 |
Electrical Safety | EN 61010-1 |
Network Rail Data Logging | NR/L2/SIG/30036 |
Orderable Parts
Part No: | Description | Photo |
|---|---|---|
SLX-VHLC-SS | S-LX Assembly for single module Vaughn Harmon Level 1 x HZS, 1 x SLX, DIN Mount |  |
SLX-VHLC-DS | S-LX Assembly for twin module Vaughn Harmon Level 2 x HZS, 1 x SLX, DIN Mount |  |
SLX-TT-SS | S-LX Assembly for SSI Tech's Terminal system. 1 x HZS, 1 x SLX, DIN Mount |  |
SLX-SEAR-SS | S-LX Assembly for SEAR II Level Crossing 1 x HZS, 1 x SLX, DIN Mount |  |
SLX-SDL-SS | S-LX Assembly for SSI Data Links. Park Signalling Equipment Not Included. 1 x HZS, 1 x SLX, DIN Mount |  |
SLX-S2-SS | S-LX Assembly for S2 TDM systems. 1 x HZS, 1 x SLX, DIN Mount |  |
SLX-MCS-XSS | S-LX Assembly for MCS system ACE 1 x RS422 Isolator, 1 x HZS, 1 x SLX, DIN Mount |  |
SLX-HXP3-SS | S-LX Assembly for HXP-3 Track Circuit Systems. 1 x HZS, 1 x SLX, DIN Mount |  |
SLX-FUES-SS | S-LX Assembly for FUES Hot Axle Box Detector 1 x HZS, 1 x SLX, DIN Mount |  |
SLX-FLEX-0S | S-LX Assembly for Flex Life Level Crossing. 1 x SLX, DIN Mount |  |
SLX-AZLM-SS | S-LX Assembly for AzLM Axle Counter ACE 1 x HZS, 1 x SLX, 19” Rack Mount |  |
SLX-AZLM-SD | S-LX Assembly for AzLM Axle Counter ACE were additional layer of cyber security is required (see applications notes) 1 x HZS, 2 x SLX, 19” Rack Mount |  |
SLX-1024-DD | S-LX Assembly for 1024 TDM systems. 2 x HZS, 2 x SLX, DIN Mount |  |
...
Part No: | Description | Photo |
|---|---|---|
MIS-WHP-06 | 2/3/4G Hi-Gain Mag-Mount Antenna with 6m Cable |  |
MIS-WHP-10 | 2/3/4G Hi-Gain Mag-Mount Antenna with 10m Cable |  |
MIS-WHP-15 | 2/3/4G Hi-Gain Mag-Mount Antenna with 15m Cable |  |
MIS-BRK-RACK | 19” Rack, 1U Mounting Tray, fits S-LX , suitable for other applications |  |
MIS-BRK-DIN | Stainless Steel BR930 Size DIN Rail Bracket, fits S-LX, suitable for other applications |  |
SLX-0-DB9-X | DB-9 RS232 Cable - 'X' = Length in meters |  |
SLX-0-DB25-X | DB-25 RS232 Cable - 'X' = Length in meters |  |
SLX-0-SPLIT | DB-9 Three-Way Splitter Cable |  |
SLX-0-GB | Replacement S-LX compute module |  |
SLX-0-HZS | Replacement HZS PSU / Port Isolators |  |
SLX-0-KIT | Replacement plug-coupler kit. Contains all plug couplers |  |
S-LX Module Specification
...
Electrical
...
...
CPU
...
ARM7 Cortex A8 1 GHz
...
RAM
...
512 MB DDR3 DRAM
...
OS
...
Debian Industrial Linux
...
Ethernet
...
2 x 10/100 Mbps MDIX - RJ45
...
Serial
...
2 x RS232/422/485 Software Selectable
921.6 kbps Max.
...
USB*
...
1 x USB 2.0 Host - Type A Connector
...
Cellular
...
LTE (4G) Modem with 3G fall-back
...
SIM
...
Standard Mini SIM
...
Storage
...
8 GB eMMC onboard
1 GB Industrial SD Card
...
Input Voltage
...
12 V to 24 V DC
...
Power Consumption
...
5.4 W Max
...
Isolation
...
> 4 MΩ at 1,000 V DC
...
Indications
...
Power, Storage, Connectivity, USB, Run, Fault, Signal Strength
*Where USB hubs are utilised, these hubs must also be Network Rail Type Approved for Monitoring Applications.
...
Mechanical
...
Length
...
129 mm
...
Width
...
27 mm
...
Depth
...
101 mm
...
Weight
...
230 g
...
Mounting
...
DIN Rail
...
Environmental Ratings
...
...
IP Rating
...
2X
...
IK Rating
...
06
...
Temperature Range
...
-5 to +55 °C
...
Flammability
...
UL94-V0
...
Environmental
...
EN 50125-3
...
EMC
...
EN 50121-4
HZS Module Specification
Electrical
Serial Input
1 x RS232 Full-Duplex 3-Wire Input
Serial Output
2 x RS485 Half-Duplex 2-Wire Output
Baud Rate
57,600 bps max.
Input Impedance
> 1 MΩ on both RS232 TX and RX Lines
Power Supply
85 V to 250 V AC
Power Consumption
0.6 W (HZS Module Only)
Output Voltage
12 V DC +/- 5%
Maximum Output Load
9 W
Isolation
> 4 MΩ at 1,000 V DC
Indications
Power, TX Active, RX Active
Mechanical
Length
129 mm
Width
27 mm
Depth
101 mm
Weight
370 g
Mounting
DIN Rail
Environmental Ratings
IP Rating
3X
IK Rating
06
Temperature Range
-5 to +55 °C
Flammability
UL94-V0
Environmental
EN 50125-3
EMC
EN 50121-4
Creepage & Clearance
EN 50124-1
Electrical Safety
EN 61010-1
Network Rail Data Logging